Description
Wren Carbon MTB Handlebars
All Wren Carbon MTB handlebars are hand laid using aircraft grade carbon. Layups are computer designed to maximize strength while saving weight. Each individual handlebar is weighed and put through QC check to ensure consistent quality.
Wren Carbon MTB handlebars may be cut down to fit your specific width. We recommend taping the area to be cut and using a 32TPI hacksaw blade.
Carbon Mountain Bike Handlebar | Carbon MTB Handlebars | Fat bike bicycle
Wren Carbon MTB Handlebar Specifications
| Series | Clamp Diameter | Rise | Up Sweep | Back Sweep | Width | Weight |
|---|---|---|---|---|---|---|
| 310 | 31.8mm | 0mm | 0° | 6.5° | 750mm | 170g / 5.9oz |
| 330 | 31.8mm | 15mm | 3° | 5° | 750mm | 181g / 6.4oz |
| 350 | 31.8mm | 25mm | 5° | 9° | 840mm | 240g / 8.4oz |
| 360 | 31.8mm | 42mm | 5° | 5° | 840mm | 239g / 8.4oz |
| 380 | 35mm | 25mm | 5° | 9° | 840mm | 223g / 7.8oz |
Jason Dellinger –
Purchased a 310 that I cut down to 680mm and a 100mm 6 degree stem I run inverted on the new 650b hardtail XC rig. Really light. I ride fairly rocky/rooty trails in Michigan and have had no issues and loved the setup. There is one trail with a new feature that drops 6-7 feet from the apex of the launch to the landing that I’ve hit 7-8 times so far with zero issues and two less than graceful landings early on. I’m only about 160lbs with a Fox Factory Float 32 SC but if you’re concerned about the durability of this featherweight set up on an XC rig, I’d tell you I ride with 100% confidence in my Wren top end set up. This won’t be the last Wren bar/stem combo I purchase.